The drilling and tapping center is a high-performance CNC machine tool widely used in the field of metal cutting.Plastic locking panel for drilling centerAs an important part of the drilling and tapping center, its installation quality directly affects the operating convenience and safety of the machine tool.
1. Preparation before installation
On-site inspection:
Confirm that the flatness and verticality of the installation location meet the requirements.
Make sure the installation area is clean, tidy and free of debris.
Preparation of tools:
Prepare the required installation tools.
PreparePlastic locking panel for drilling centerand its accessories to ensure that the quantity and quality meet the requirements.
Material control:
Check the panel for any damage or defects.
Check if the panel model matches the drilling and tapping center model.
2. Installation Steps
Positioning mark:
Mark the predetermined position according to the installation drawing of the drilling and tapping center.
Use a spirit level to ensure the marked location is level and plumb.
Install the lights:
Install the panel fasteners in the marked locations to ensure they are firm and reliable.
Use a screwdriver to tighten the fasteners, being very careful not to damage the panel.
Install the panel:
Align the plastic latch panel with the fastener and gently place it in place.
Use a spirit level to check the level and plumbness of the panel to ensure accurate installation position.
Connect the electrical wiring:
Connect the electrical wiring to the panel according to the wiring diagram.
Make sure the wiring is correct and firm to avoid short circuit or poor contact.
Debug execution:
After making the electrical connections, perform a functional test of the panel.
Check whether the buttons, display, etc. of the panel are working correctly.
3. Installation precautions
Safety first:
During the entire installation process, safety procedures must be strictly followed to ensure the safety of people and equipment.
Avoid generating static electricity during installation to avoid damage to electronic components.
Environmental requirements:
The installation environment should comply with the requirements for the use of plastic lock code panels and avoid adverse conditions such as high temperature and humidity.
Make sure the installation area is well ventilated to prevent the panel from being deformed by moisture.
Regular maintenance:
After installation is completed, regularly inspect and maintain the panel to ensure its long-term stable operation.
Clean the dust and dirt on the panel in time to keep the panel clean.
Correct installationPlastic locking panel for drilling centerThis is the key to ensuring the normal operation of the machine tool and improving the convenience of use.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, and rapid prototyping services.
