1. The speed of the white steel knife should not be too fast.
2. Copper workers use white steel knives and use flying knives or alloy knives.
3. When the workpiece is too high, it should be roughened with a knife of different lengths.
4. After opening it with a large knife, use a knife to eliminate the balance to ensure that the balance is consistent.
5. Flat to flat application – Knife processing, use less ball knife processing to reduce processing time.
6. When the copper workers are cleared, check the R size at the corner, then determine the size of the bullet knife.
7. The four corners of the school surface plan must be flat.
8. Any obliqueness is an integer, which is processed by a slope knife, such as the position of the tube.
9. Before doing each process, consider the amount remaining after the processing process of the previous process to avoid excessive empty knives or too much processing.
10. Try to take a simple knife path, like appearance, digging, single factor, less surrounding.
11. When you walk with Wcut, you can go to finish, don’t take rough.
12. When the shape of the form is light, first rough, then refined, when the part is too high, first light, then light.
13. Reasonably configure tolerances to balance processing accuracy and computer calculation time. When rough, the tolerance is set to 1/5 of balance.
14. Do a little more process to reduce empty knife time. Think a little more and reduce the risk of mistakes. Make a little more auxiliary surface to improve the processing condition.
15. Establish a sense of responsibility and carefully check each parameter to avoid rework.
16. Diligent learning, good thinking and continuous progress.
Consider the smooth mouth! Non-plane mill, use more ball knives, use less knife, don’t be afraid to pick up the knife;
Don’t be afraid to supplement, appropriate supplementation can improve the treatment speed, beautify the treatment effect. corner of reverse milling parts. Rough machining: Better milling reversal, precision processing: good toughness of good knife and material toughness, low hardness: more suitable for rough processing (cutting volume processing large) The toughness and hardness of the material to tools from material to tool.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
