The processing of equipment is an extremely complex process. The gear treatment cycle includes the treatment of the ordinary car → whisk treatment → treatment of teeth insertion → Dental shaving treatment → steering wheel treatment → Dental grinding treatment → Perfection treatment → drill → Groaning of holes interiors → welding → measurement, which is configured for this process. An appropriate tightening system is particularly important.
A、Treatment of ordinary cars
In the ordinary treatment of vehicles, the gear explosions are generally tight on a vertical or horizontal turning machine. For automatic tightening devices, most of them do not require an auxiliary stabilization device to be installed on the other side of the pin.
two、Treatment of equipment combination
Due to its exceptional economy, respect is a cutting process used to produce external and cylindrical gears. Respect is widely used not only in the automotive industry, but also in the manufacture of large industrial transmissions, but the premise is that it is not limited by the external outline of the room during treatment.
three
Treatment of teeth insertion
The process of processing equipment such as tooth insertion is mainly used when the tightening of the equipment cannot be treated. This treatment method is mainly suitable for the treatment of internal gears and the treatment of external teeth of certain gears due to structural interference.
Four、Treatment of shaving teeth
Shaving is a process of finishing the equipment, and it has a blade body corresponding to the shape of the gear tooth during the cut. This process has a high production economy and is therefore widely used in industry.
five、Hard car treatment
The machining of rigid cars can replace the expensive grinding processes. In order to operate it normally, the different parts of the system and the treatment parts are connected accordingly. The choice of machine tools, accessories and correct cutting tools determines the quality of the turn effect.
six、Creak
In order to successfully reach the accuracy required in the production of equipment today, in many cases, the hard finish of the surface of the teeth is essential. In mass production, a very profitable treatment method. On the other hand, similar to the treatment of samples, when adjustable grinding tools are used, the treatment of grinding teeth will show greater flexibility.
Seven、Improvement treatment
Advancement is a process of final finishing of the hard gear using an amorphous cutting angle. Perfecting treatment has not only a large savings, but also allows the machined equipment to have a smooth surface with a low noise. Compared to grinding, the cutting speed of shaving is very low (0.5 to 10 m / s), thus avoiding damage to the treatment of cutting equipment. To be more precise, the internal constraint generated on the surface of the teeth to be treated has a certain positive effect on the bearing capacity of the equipment.
eight、drilling
Drilling is a process of rotary cutting. The tree of the tool and the center of the machining hole are completely consistent in the axial direction and are consistent with the power direction of the tool in the axial direction. The spindle of the cutting movement must be consistent with the tool and has nothing to do with the direction of the movement of the food.
Nine、Inner hole grinding
The interior grinding of the hole is a mechanical treatment process with an amorphous cutting angle. Compared to other cutting and treatment technologies, grinding has dimensional and training precision for hard metals, dimensional precision (IT 5-6) and high quality surface precision for small brands (Rz = 1 -3 μm).
ten、Capacitor discharge welding
The capacitor discharge is welding the process of processing resistance welding. The capacitor discharge is obtained by a rapid increase in the current, a very short welding time and a very high welding current. Consequently, the discharge welding of capacitors has many advantages. For growing energy prices, the economy and the efficiency of discharge discharge is particularly important.
eleven、Measures
The detection of the gears is very wide and must be adjusted according to the different speed forms. Until the gears, the different important parameters of the gear are determined by measuring the length, angle and special measurements of the gear process.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
