1. Remove the burrs on steel balls
Use steel pearls to vibrate and slide on the surface of the room to come and go to the terrifying.
2. Steel needle to remove the burrs
Use the vibrations of the magnet to drive the steel needle to move on the surface of the room to remove the burrs.
3. Pneumatic brush to eliminate burrs
The pump causes the hair to vibrate and the surface of the aluminum alloy surface is removed.
4. Artificially remove the terrifying
This is also commonly used by general companies. The knife has an artificial knife and an analogy. Simplified comments: The cost of the workforce is more expensive, the efficiency is not very high and it is difficult to remove the complex holes. Technical requirements for workers are not very high, with small bullies and a simple product structure.
5. The removal of the terrifice model uses the production mold and perforate the bed to eliminate the blunder. Simplified review: It is necessary to make production costs for a certain amount of molding (coarse model + fine psumage mold). Suitable for products with relatively simple differential faces, efficiency and burning effect is better than artificially.
6, grinding and eliminating burrs, such as vibrations, hooves and drums. Simplified review: existence is not very clean. Suitable for small products with large lots.
7. Frozen and Wass
Use the burly to cool the burrs to quickly fragile, then spray the projectile to remove the burrs.
8. The hot explosion is also called hot energy to eliminate terrifying, explode to eliminate burrows. Thanks to some easy to enter a device oven, then through the role of averages and conditions, let the gas explode instantly and use the energy generated by the explosion to dissolve and eliminate the burr. Simplified review: equipment (millions of dollars), technical requirements of high operating, low efficiency, side effects (rust, deformation); Mainly used in certain high -precision components, such as precision components such as Aerospace Automobile.
9. Simple comments from the terrifying sculptor: it is suitable for the simple spatial structure, and the position of the blunder is simple and regular.
10. The principle of electrochemical reactions for the chemical elimination of the blunder, automatically completes the -burr operation with parts in metal materials automatically and selectively. Simplified review: It is suitable for terrifying internal internal to withdraw, adapted to the small troops (less than 7 wires) in the body of the pump, the body of the valve and other products.
11. Electrolysis
An electrolytic machining method on the edge of metallic parts with electrolytes. Simplified review: electrolyte has a certain corrosion, and the neighboring parts of the parts are also electrolytic. The electrolytic elimination of the burr is suitable to eliminate the intersection of the concealed part or the complex parts of the parts hidden in the room. Suitable for burrs, connection rods, valve bodies and pores of the crankshaft oil circuit, as well as pointed corners.
12. High pressure water spray the terrifying to use water as medium and use its instant impact to remove the lands and the flying edges generated after treatment, and at the same time can reach cleaning. Simplified comments: The equipment is expensive, mainly for the hydraulic control system for cars and construction machines.
13. The ultrasonic elimination of the ultrasonic ultrasonic ultrasound of terrifying can instantly high pressure to eliminate terrifying. Simplified comment: It is mainly for certain micro-furts.
14. Robot polishing with terrifying. Use the robot to switch to the belt.
15. Various brushes to eliminate burrs. Use the coordinated movement of the brushes and parts to remove the sloping from the room.
16, the tool to go to the Burrs. Use special tools to delete burrs during treatment.
Consultation Tel: 159 1097 4236
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
