1. Additional Division of Simple CNC Treatment Programming
The coordinate system will be used to find out the relationship between processing coordinates and design coordinates. Familiar with the Two -Dimensal Knife Road, Familiar With High, Parallel Processing, Three -Dimensal Processing, Will Divide Shallow Surfaces and Steep Surfaces, Understand the Tolerance and Retention Relationshipship, Understand the Calculation of the Processing of the Process, Understand the Calculation of The segmentation line of the shallow and abrupt surface, understanding the rough surface of the surface, understanding the method of controlling the rough surface. There will be three ways to control the system. Including the structure of mold, the copper male will be removed. Familiar with the cutting tools of the commonly used tools. Familiar with the impact of the hardness of the cutting material on the parameters. I can barely write the full knife path, be unable to control the secondary thickness and deeply understand the light knife. The software that includes is only a tool to express your thoughts.
Second, Simple CNC programmers have a month of experience on the basis of “one”, and they can mainly finish the treatment of the soft materials of the gongs, such as bronze, and the size is essentially precise. Basically, in steel with two simple dimensions treated and familiar with the process, which can control errors within a silk.
Third, the main CNC programmers can write the next knife path during writing during writing, and can essentially cut the chemin from the knife to the height or the appearance of the desire to cut. The empty knife is relatively small. The rhythm of the knife road is relatively good. The knife road is heavy, the thought is not very clear and there are many places where repeated waste.
Fourth, the need for mold engineers to direct the work
At the three upper heights, you can independently see the results of the treatment of machine tools, do not have a big problem, write the three-dimensional knife route, treat it after success and modify the program under tension. Basically, cannot be divided independently, it is necessary to rely on mold engineers or 2D designs of mold structure. There is a certain understanding of the situation of the rebound of the knife, the knife, the cut, the angle problems and not in place. There are still a lot of empty knives. But understanding the software settings was deeper.
V. can operate independently, but the speed is relatively slow, but the speed is not very fast. There are not many problems. The quantity of retention is uneven, the two -sweet interface is not smooth and the polishing is difficult.
6. Basically, it can be competent in work software and qualified, competent in shortcut keys, by operating the clouds and in flowing water, including the assembly of the module, knowing how the quantity of surface of Treatment is paired with the assembly of mold, knowing the problem of the product caused by the processing surface, knowing how to continue treatment to prevent the future of mold assembly, the structure of products and problems ‘assembly. Familiar with data security. Know how to deal with the positioning of products that require all parties. For copper tendons that are easy to reform, the steel material includes how to get off the knife. For the half open mold with moldings, understand how to monitor and map, save time or prevent the knife from hitting the knife.
7. Capable of dealing with the problem of the design of independently products and actively change the design of the products to respond to the rationality of the structure and the treatment of mold. Can accurately calculate the treatment time and cope with the citation of CNC treatment facing the product. Design costs and processing costs are correct. Good to communicate with customers. Can be cut into cut drawings. Copper position drawings. Copper that is not complicated. 8. It can communicate effectively with various departments and do a work software management to manage and have large companies. Air. Bronze of the rotary body. It will repair the deformation caused by the input and output of the data. Familiar with the price of the mold, the customization of the molding, the soggy position, the heat flow. Control the idea of the entire product, from the parts of the product to the transformation into molds and various problems encountered at a certain height. Familiar with the expression of mold coordinates and assembly coordinate systems in drawing, allowing the different departments of the company to fully share the data, quickly reflect the relationship between the assembly of the parts and the positioning of molds , quickly discover the size of the key and clearly expressed the key explicitly in the engineering diagram which must be expressed in the engineering diagram.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
