CNC Knowledge: Precautions for the process of processing aluminum alloy shell

As we all know, a qualified aluminum alloy shell requires many processes to produce. In the production process of aluminum alloy shells, it is sometimes inevitable to be affected by various aspects. Therefore, in order to effectively increase the qualification rate of aluminum alloy shells, we must make precautions in the production process. Then, let’s talk about the precautions of the process of treatment of the aluminum alloy shell.

The precautions of the process of treatment of the aluminum alloy shell are as follows:

Press any straight:

The right is a very important link in the process of manufacturing aluminum alloy shells. Workers straightening must pay attention to the intensity of direct use. If the resistance is too large, it can cause deformation, closure, orange skin and other problems with aluminum profiles. If the strength is too small, it may not be simple and cause flexion. Therefore, we must grasp the force.

Adjustments control:

This link is also very important. Currently, executive workers must be careful: whether this material is large or small, whether it is a tube material or the material withdrawn from the Moule Plan. In general, the frames at both ends of large materials and tube materials are not easy to fold, but the materials removed by small materials and printing molds are easy to fold, so they must be brought closer to both ends in the middle. However, some aluminum profiles are not sufficient, such as: shutters, window slices, lids, etc., should put this material on obsolete aluminum profiles, then lift it in the box.

Surface finishing:

Once the speed and hardness have reached the standard, the aluminum profile is not easy to fold, but it is always necessary to pay attention when it is on the shelves.

Details that require attention during the treatment of aluminum alloy shells are shared here. Precision, precision of repeated treatment. .