Click: 20 3D printed sword models to download
In this article,magic monkey networkwill show you an astonishing range ofYou may have seen 3D printed swords in books, video games or films. for everyone3D printed swordwe’ll also cover some printing and assembly tips.
Ultra-thin
1. Sidesword
Assembly requires wooden dowels and additional hardware (source:EternalMadHatter, from MyMiniFactory)
The Side Sword is a large Renaissance sword with an interesting hilt design, a triangular blade, and a sharp tip. This sword is used18 3D printed parts, but not fully printed as they require a few other parts including a dowel (rod), nut and bolt. These unprinted parts help hold the 3D printed parts together.
The only printing trick the designers suggested was to use supports for the handguards and saddle parts.
2、Demon Dagger
This Skyrim dagger looks great once painted and finished (Source:Swartzwalker via Thingiverse）
It’s not a sword, but it’s still worth collecting. It is based on the game The Elder Scrolls.A model designed for the Dyedek dagger in 5: Skyrim. The model is made up of eight pieces and features a sturdy, curved design with plenty of sharp points. As you can see in the image above, after painting and touching up the dagger, it looks very cool and realistic.
The designer provides some print settings that he used to successfully print this template, making it easier to create a template. These settings includeLayer heights from 0.12 to 0.2 mm (depending on component), 25% infill density and supports enabled. The makers also pointed out that they printed the model in PLA.
3、Kailo·Lun’s lightsaber
The lightsaber project is divided intoMore than 40 3D printable parts (Source: LeFabShop via Thingiverse)
KailoRen’s lightsaber first appeared in Star Wars: The Force Awakens and is one of the coolest lightsabers ever created. If you’re not familiar with this particular sword, it’s like a traditional lightsaber but with a crossed blade above the hilt. This model is based on images from the movie trailer and contains over 40 pieces that you can print in a variety of colors to make it more similar to the lightsaber from the movie.
If according to the designerAssembling the printed parts should be easy with the assembly and coloring instructions provided on the Instructables page. While the designer printed the model in PLA with a layer height of 0.2mm, another manufacturer also achieved good results using a layer height of 0.2-0.3mm, infill density 20 to 30% and no support.
4、Katana
The item includes a katana sword, a scabbard and a display stand (Source:lmbcruz via Cults）
The katana is one of the coolest swords because of its smooth blade, sharp edge, and long handle. This is due toThe 3D printed katana project designed by Dethu Guillaume and posted by Cults user lmbcruz includes a katana sword, scabbard, and display stand.
The katana itself is made ofMade up of 10 printable parts, you’ll also need some hardware including a few M3 screws and threaded rods to securely attach the parts together. The threaded rod provides strength from part to part, and the designers also say that you should use glue to further ensure the structural integrity of the sword.
They also mention that you should consider sanding the parts to make them smooth, correcting imperfections with epoxy or repair putty, and touching up with spray paint.
5、Triton
You can glue different parts of this sword with epoxy or superglue (source:TotallyAddicted via printables）
The next model is based on Blackbeard’s broken sword from the Pirates of the Caribbean movie.–Designed by the Sword of Triton. According to designers, you can glue them together with epoxy or super glue. The designers also say that you can strengthen the sword by inserting a 36-inch metal rod with a diameter of 3/16 inch into the center of the sword.
The creators mentioned that they use the standardThis model was printed with a Prusa i3 MK2 configuration. This may not be of much help to you, as “standard” is a fairly broad term and PrusaSlicer (assuming this is the slicer you are using) occasionally changes the default slicing profile. Therefore, we recommend checking out similar models and their printing tips to get an idea of how this sword should be used.
6、Black saber
This oneDarksaber is foldable and designed in Fusion 360 (Source: yeetkus via Thingiverse)
You’ve probably seen the traditional lightsabers from the Star Wars saga, but the next sword is even rarer: the legendary Darksaber. if you areFans of The Mandalorian, you may have seen this sword, but it also appeared in the animated film Star Wars: The Clone Wars.
This one is awesomeThe 3D printed dark sword is bendable and features exquisite details, adding a cool aesthetic to the sword. The designers used a layer height of 0.2-0.3mm and an infill density of 20% to bring the model to life. They also provide detailed print settings for some of the larger parts, which you can view on the project page linked below. Also be sure to use supports for the end parts of the tool holder (but other parts shouldn’t need them).
7、interpreter
Simple construction that doesn’t require a lot of painting (source:Caden_2002 via Thingiverse）
One of the most iconic swords in all of anime, The Expositor is a fan favorite of the Swordsman series. This life-size model is perfect for everythingThe perfect addition to cosplay and also a great decoration.
The file is divided into11 pieces, can easily fit into a standard size print bed. The designers even included grooves to make assembly easier, although they recommend using glue to permanently bond everything together. Many reviews recommend oversizing the alignment pins for a tighter fit.
Most documents will print fine without support, although you may need to add something to the edge to prevent curling. Since the color palette is simple, you can choose to print the blade black and use silver paint on the details.
8、kryptonite
This project usesLED strips illuminate the blade in a kryptonite-like color (Source: jmunkki via MyMiniFactory)
existIn the DC Universe, there are many swords made of krypton or kryptonite, and this sword is a unique work from one of the makers. This sword is really cool because it uses electronic components that make the blade appear green (a color related to Kryptonite). Even with the electronics, the sword is not too bulky and the hilt is elegantly designed with the electronics stored on the hilt.
This project requires17 different 3D printed parts as well as M5 screws, LED light strips and lithium-ion batteries. The designers have provided detailed guidelines for printing this sword, so the printing process should be fairly simple. They said they printed the parts using PETG and semi-flexible materials, with three shells, 30% infill density and no supports.
9、Foldable
The blade of this broadsword collapses into the handle (Source:Bingo draws via Thingiverse）
Swords aren’t typically considered stealth weapons, but this one bends all the way to the hilt. This printed-in-place model is a broadsword, but the designers have also made a range of other types of folding swords.
The length of this sword is approx.Measuring 8.5 cm (just over 34.3/4 inches) long, it folds using concentric cylinders so it can be easily extended with a flick of the wrist. Since the concentric cylinders can bind together during the printing process, the designers have provided a test pattern that we recommend printing before making the entire sword to avoid wasting filament.
10、Nasir
Narsil is the broken sword from The Lord of the Rings, used by Isildur to cut the Ring of Sauron. This design was adapted from the Anduril model–Anduril is a sword forged from fragments of Narsil. As you can see in the image above, coloring and retouching the model really adds a lot of beauty.
The designers didn’t offer any printing tips, but one manufacturer listed some tips for success. These slice settings include0.12mm layer height, 10% infill density, and supports enabled.
11、Sword of Omens
This kind of feelingThe ThunderCats-inspired design was remixed from a smaller version of the dagger (Source: mrtek007 via Thingiverse)
The next thing I want to introduce is the character from the cartoon “Thundercats”.“Sword of Omens”, this model is a replica of the dagger shape of the sword. The multi-piece model features a long, well-designed handle as well as crossed, rain-resistant hand guards. The design has been updated several times to improve the appearance and printability of the model.
The designers don’t provide any printing tips to help you configure slicer settings, but several producers offer helpful settings. One producer published a report using polylactic acid (Great job on the sword printed in PLA material, it says the infill density used is 25% and no supports.
12、dagger
You can print this sword with a layer height of0.3mm, 20% infill density (Source: MistaBreed via Thingiverse)
The design of this sword has a strong ancient Greek and Roman style, with its straight double-edged blade and round hilt similar toXiphos. The sword was designed using SketchUp and is divided into eight different parts, with cylindrical projections on one end and holes on the other so the pieces can be connected. Despite this design, you will still need to use glue, epoxy, or other adhesives to stick the parts together because the built-in connections won’t be enough.
In addition to gluing the parts with heavy-duty epoxy, designers also recommend sanding and painting the parts for a nice finish. Although the designer does not list any actual printing techniques, one manufacturer used0.3mm layer height and 20% infill density.
13、dice sword
Not all great swords have to be great (source:swensowa via Thingiverse)
Take this dice sword in style to your next game of Dungeons and Dragons. This design fits standard dice and is sure to catch everyone’s attention.
Its compact design means it fits easily into your pocket or bag for traveling between games. The body of the sword is divided into four pieces, each of which can be put into place. Designers always recommend using glue to hold it together.
The scabbard is designed to be a two-tone print, and you can customize the color of the leaf emblem on the scabbard using a multi-color system or a simple filament swap. If you want a simple design, you can also choose a sheathed version without leaves.
You may need file support, especially if your printer is not wide enough to print the blade sideways. Due to the tapered shape of the blade, many manufacturers have had issues with the handle not sticking properly, so an edge and backing may be required to finish it. To complete the design, you may want to wrap some string or fabric around the handles, as they will be bare.
heavy sword
These final sword designs live up to the true warrior spirit. Although they are more decorative than functional, there is no denying that each one is impressive.
14、Master Sword
Individual parts of the model can be connected using integrated pin joints (Source:Skeleton bolts via MyMiniFactory）
The Master Sword is one of the most revered weapons in the Zelda gaming universe, going by many names, including the Legendary Sword, the Evil Blade, and more. In the game, the sword is huge and bulky. The model measures approx.At 1.2 meters (about 47 1/4 inches), he rivals the height of his inspiration.
To make the weapon easier to print, the sword was split into11 3D printed parts, connected by integrated mortise and tenon joints. The designers printed the model with a layer height of 0.2mm and an infill density of 10%, consuming around 560 grams of filament. Some builders mentioned that they also glued the parts together, probably for added strength.
15、Frostmourne
Designers useSolidWorks, ZBrush and MeshMixer bring Frostmourne to life (Source: alexprov via MyMiniFactory)
This is the model of the Frostblade in “World of Warcraft”. This is the Blade belonging to the Lich King. Modelers useSolidWorks, ZBrush and Autodesk MeshMixer combined solid and organic modeling to create the detailed features of the sword. The model is designed as a print of 12 pieces, assembled using slots and joints instead of glue.
The designers stated that they usedThe sword was printed with a layer height of 0.2mm and an infill density of 10%, saving filament for such a large project. A community creator also posted a great design printed in PLA, noting that it used two shells.
16、Ekko’s sword
Support rods do this3D printed cosplay parts become solid (Source: fntsmn via MyMiniFactory)
Whether you’re a former “League of Legends” player or looking forward to itWith the return of the Arcane series to Netflix, this next knife is probably very familiar to you.
This oneEkko’s sword replica features great detail while maintaining a simple, easy-to-print design. For ease of printing, the model is divided into 10 parts, each of which fits perfectly on a standard 3D printer bed. The designer provides instructions and a supplies list for all support rods used during assembly.
If you want to understand the assembly instructions in a more visual way, you can also find a production video in the instructions. This is another great build for those who aren’t too confident in painting their own props, as you don’t have to do much to make this model look great. The designer also released aA 30 cm version is available for those who want this look to be mobile.
17、Guardian Sword
This Zelda Guardian sword was used for90 NeoPixel lights, 34 inches long (Source: adafruit via Thingiverse)
Next up is a model of the Guardian Sword wielded by Link in The Legend of Zelda: Breath of the Wild. The model contains11 3D printed parts, a battery, some small circuit boards and over 90 NeoPixel lights (used to illuminate the body of the sword) fully demonstrate the power of this sword. If this seems like too much, don’t worry, Adafruit provides detailed instructions for making it.
Although the designer didn’t provide any printing tips, one designer posted a stunning mockup and shared what they used.0.1mm layer height. Since the model has no hanging parts and has a small footprint, no supports or rafts are required.
18、Chaos Blade
Two blades are better than one (Source:KirbyDowney_65 via printables）
God of War has taken the gaming world by storm over the past few years, becoming one of our most anticipated games in recent times. These replica swords are a great way to commemorate your gaming days.
Printed in seven parts, the Blades of Chaos file is an excellent high-definition print that should give you no problems. The designers went to great lengths to sculpt all the cracks and textures that make this model unique.
to use5mm rods hold the pieces together, aiding alignment and strength. You can also add your own strings to give your model an even more finished look. The file is designed to use as little media as possible.
Although not required, this print will shine even more with a nice coat of paint. Even a simple coat of nice dark paint over textured areas can add a lot of color to the finished accessory.
19、halo
With the help ofLit in NeoPixel, this Halo energy sword looks like the one in the video game (Source: Adafruit Industries via YouTube)
If you’ve played any of the Halo video games, you’re probably familiar with the power sword, the close combat weapon of some of the Covenant Empire’s alien soldiers. This sword is said to use light energy to destroy the sword wielder’s opponent, and thisThe 3D printed version uses LEDs to simulate this function.
This model is composed ofDesigned by the Ruiz brothers at Adafruit, it uses NeoPixel LEDs, batteries and some small electronic boards to implement the functionality. The sword is designed in 14 different parts, and Adafruit offers a complete guide to printing the parts and assembling the electronics on its website.
In the guide, the designers recommend starting withPrint the parts at a print speed of 50mm/s and enable supports for the front and rear handles. One producer also listed a layer height of 0.18-0.25mm and an infill density of 30% as print parameters.
20、dragon slayer
This is perfect if you are working on a big project (source:Delphant via printables）
Finally we have a very famous sword in the anime world–Dragon Slaying Sword. This model is almost a 1:1 replica of the Furious Greatsword, an epic 3D printed sword.
This is a very large and tall print. Fortunately, the designers offer two different versions, one with a horizontal cutout and another with a central cutout, suitable for small printers.
Regarding assembly, you can see a very detailed step-by-step process in the instructions, which includes the additional support rods needed for a print of this size.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
