Today, we will discuss the deformation, the clip injury and the unstable size of the parts during the treatment. Sweet claws can ensure the repeated positioning accuracy and the length of the part of the part. The most important thing is that the energy of the soft label and the surface of the part adapt to the maximum extent, which can not only ensure the largest torque, but also avoid the wound of the room. So how do you make soft claws?
1. The choice of soft claw material
The soft claw material must be “soft”, that is to say good treatment performance.
2. Selection of the size of the soft claw
The size must be at least 1/3 of the length of the clip.
3. The installation position of soft claws on the card
Any type T block exceeds the maximum diameter of the card, which is not authorized, and there will be major safety risks.
4. Pressure and location of the use of the claw repairer
There are clear requirements for pressure and location when using the claw repair: the pressure when recommended for pressure when the treatment of the part is close, and the frame is in the middle of The activity range during the treatment, and the direction and the part of the maintenance force when repairing the repair of the claw, the direction of the tightening force is consistent.
5. The effect of the diameter and speed of the card on the pinch of the clamp
Due to the centrifugal force, the card maintenance force will be considerably reduced during the high -speed operation.
6. Interior holes with the same size of the instruments as the part
To reduce the possibility of taking off a part.
7. Add the knife groove
To ensure the double position of the part.
8. Remove the burrs and the pointed corners on the soft claws
Note, don’t scratch your hand.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
