In basic process order:
1. CISTUAGE: Referring to the process of the material to obtain the rectangular part through the shear machine. The company uses CNC to cut the bed for clean size treatment.
2. Digital rush: refers to the use of CNC Punching for punching operations. once.
3. Laser cut: refers to the part process by the laser cutting process. The processing cost is high and the process engineer must use this process less.
4. Display of the cutting machine: it refers to a process that uses a crushing wheel cutting machine.
5. SAW: It refers to a process that uses the sawmill to eat.
6. Settlement: Referring to the process of using molds to treat the form of the product on an ordinary punch or other equipment.
7. Punching: refers to the part of the normal punch process and mold treatment holes.
8. FENS: refers to the training process of the part of the flexion machine. The company refers to the use of CNC folding machines, with the corresponding flexion molds, to produce first test machines, regulators and first inspections.
9. Folding: It refers to the turn of small pieces and simple parts in small installation pieces.
10. Adjustment: Referring to the process of using molds on an ordinary punch or another equipment to deform the part.
11. Pumping: also called “turn”, refers to the process of using mussels on an ordinary punch or another equipment to form an edge of the circular hole in the room. The company refers to a stretching process that uses an ordinary punch and special molds to increase the thickness of the attack silk.
12. Drilling: he refers to a drilling machine with a drilling machine. .
13. DEMONAGE DRILLING: This means that a model is treated by digital punch, then the positioning method is used to drill batch.
14. Attack wire: Referring to the process of treatment of the inner wire on the part.
15. Expansion: refers to the process of processing small holes on the room like a large hole with a forest or a boost.
16. Cut holes: refers to the combined process with connectors like a deep screw, and treats a pore with a cone with a cone on the room. Our company refers to the use of drilling machines and appropriate exercises (90 degrees, 120 degrees). These must use a real method.
17. Press Rivet: Referring to the process of using ties such as the punch or the oil compressor to firmly support the rivet nut, riveted screw or riveted nut pillar pillar Solid on the room. Normally, the direction of the riveted part is the direction of the terrifying to gently load the rivet of pressure.
18. Rivet increasing: he refers to the part of the part shipwreck, then using a punch or oil pressure machine to press the rivet nut to press the process on the piece.
19. Put the mother: refers to the use of Rivet type crafts. The rivet (POP) connection process and other connectors with a Mimer sweater -UP is connected to the room.
20. Riveting: Referring to the connection process of two or two or more rooms of parts with pistols as a tool.
21. Riveting: Use a rivet to connect two or more parts to the face to face process.
22. Punching bag: Referring to the process in which the part is used to form a protruding shape in the punch or oil pressure machine.
23. Rush to Tear: also known as “Chongqiao”, refers to the process that uses mussels in the punch or oil pressure machine to form a form process like a bridge.
24. Printing: Reference to the process of using the mold, symbols or other impressions on the room.
25. Cutting angle: Reference to the process of using the mold of mold to use the mold on the punch or oil compressor.
26. Punching holes: Reference to pores which are pushed out of the room on the room on the ordinary punch or the punch NC.
27. Training: Referring to the transition process to the flat process with a certain form.
28. Drilling: Referring to the process of using exercises to use exercises on drilling machines or moldings to perforate holes in the room.
29. Facking: Referring to the process of processing the cutting corners of the part using the mold, the knife and the polishing. 30. School level: Referring to the part of the part processing process with other equipment before and after the treatment of the room.
31. Return: Reference to the reimbursement process of the second snails which have the pre-attack part.
32. Patching Protective film: refers to the process of using thin movies that can protect the surface of the room to protect the surface of the room.
33. Tears protection film: refers to the process of cleaning the protection of the film on the surface of the room.
34. School form: Referring to the process of adjusting the treated part.
35. Hot reflection: refers to the plastic tightening process that uses heating equipment (hot air guns, oven).
36. TAG: Referring to the labeling process to the designated position of the part.
37. Bittic: refers to a process processing using a brushed machine and a belt on the surface of the room.
38. Follow: Reference to the process of using the polishing equipment to perform light treatment on the surface of the room.
39. Warm treatment: refers to the special treatment process to improve the hardness of the room.
40. Remove Burrs: Referring to the treatment of the part to eliminate the edges of wool from the part with tools such as polishing machines, swords, etc., and make the process of treatment of the smooth and flat part.
41. 焊 Weldstone welding: refers to the use of a welding machine for welding operations, which refers to the process which requires the application of high welding quality.
42. Welding welding: Referring to the use of the welding machine to carry out complete welding operations, which refers to the process used when the requirements for the quality of the welding and the polishing are high.
43. Touch welding: also known as: “point welding” refers to the welding process welded by the affected welding machine. The company refers to the use of welding machines for spot welding operations.
44. Welded welding: refers to the use of carbon gas protection welding machines for DOT welding operations. .
45. Welding welding: Referring to the use of gas protection welding machines for carbon dioxide for complete welding operations. Deformed after complete welding.
46. Plantar welding: also known as planting welding, refers to the process of using the planting welding screw to firmly weld the plantation screws on the room.
47. Grinking welding: it mainly refers to the smooth and flat process of tools such as polishing machines and swords. The company refers to the polishing operation of the welding part with hand electricity.
48. Preliminaries: refers to the treatment of sheet metal treatment.
The rust process and adding surface covering (such as a phosphorient film) and process cleaning.
49. Stracing: Referring to the process of using atomic ashes to compensate for defects on the surface of the room, such as welding gaps or concave pits.
50. GROTING AND POLISHING: It mainly refers to the process of using a flat mill or a sand fabric for the scraped piece to perform the surface polishing process. The company refers to a repair process that uses the gas grinding machine to reconstruct the ash.
51. Paint Spray: Referring to the process of using a special spray gun to spray paint evenly on the surface of the room.
52. Spray: Because the company is an automatic flow line, it only specifies the color number of the spray number in the process. , Large / Small orange pattern, coarse, coarse, coarse, coarse / medium / ending sand pattern, flat light, optical number).
53. Wire wire protection: it refers to a sort of rubber round with special protective nuts, screws and nut pillars. This protection is responsible for the mounting chain.
54. Pape the conductive protection: it refers to the protection of specific zones with high temperature rubber paper. This protection is responsible for the mounting chain.
55. Silk printing: refers to the process of text formation or patterns on the surface of the room with a special grid with a special grid. A series of inspections such as membership, organic solvent, color difference and the police are necessary.
56. Electro -Galvanized: refers to the process of veneer a layer of metal on the surface of the room for protection or aesthetics. The company means that after the factory qualified the iron part in electroch, it is produced by the planned department.
57. Nickel plating: Referring to the process of veneer a layer of metal on the surface of the room to protect or an aesthetic room. The company means that after the factory qualified the part -plated part of copper which must be tackled, it is produced by a planned department. .
58. Oxidation: Referring to the process of forming an oxide film on the surface of the room to protect or aesthetic.
59. Pape of sand: refers to the process of treatment of the surface of the partner in shortbread in shortbread of the sand machine.
60. Assembly: refers to the assembly process of two or more parts. The assembly of the sheet metal component, in principle, the large spray pieces and the cabinet of the cabinet are responsible for the assembly.
61. Packaging: refers to the part protection process and transport facilitation.
62. The surface surfaces of the digital drawing are positive: in the future, the process must be necessary to use the diagram as positive. The process engineer must improve the production of similar problems in production must be reported in a timely manner.
63. The link up and ends: in the future, the quantity of drawings requires the amount of drawings must be explained in the technical requirements.
64. Press Riveting Down, by pressing Riveting Afform: in the future, the quantity of drawings requires the amount of drawings must be provided in the technical requirements.
65. Pores of shipwreck and sink: in the future, the quantity of drawings requires the amount of drawings must be provided in technical requirements.
66. Programming: It refers to the programming software of the equipment manufacturer and the processing procedure of the order of processing of digital molds in the CAO diagram of the dedicated IT technology service. Normally.
67. Drilling drill: refers to a mold card which requires the need to locate artificial drilling.
68. Workers’ welds: to guarantee the technical requirements of the size of the welding, the angle, the location, the size of the space, etc., the process engineers must be considered good that technology product.
69. Installation of spraying conductive workers: refers to the large area of the pulverization protection.
70. Construction / Inspection work: during assembly, to ensure that the size of the application of the customer is not installed when the customer responds, we must perform the size and the screws of the customer during the assembly. Considering product engineers during product technology.
71. Flexion inspection: it is intended for parts by lots and complicated.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
