What is the difference between double grinding and fine grinding?
Each treatment technology has its unique advantages. In order to maximize the balance and take out the finished room, two -end facial grinding is the preferred processing process. For example, in large -scale production, the grinding time of a single cam used for the continuous power system is less than 0.5 second.
However, in order to obtain surface precision and maximum dimensional precision, it is preferable to make fine grinding. For example, the precision of precision treatment of hydraulic components can reach ± 0.001 mm.
Why is the parallel index of the plane very important?
Plan parallelism is the precision characteristics of the surface of two relative parts with parallel flat. This is necessary for the components installed in the system or component.
The double -end grinding machine is considered one of the “classic” grinding processes. In this processIn the middle, the part is not fixed and has not been fixed to the “nest” which is not fixed on the tray of the room. Then treat both sides of the room between the two factories. The upper grinding wheel is set with the “inclination” orientation parameters, which allows the upper mill to maintain the required angle with the lower mill. Consequently, the space between the grinding wheels must be greater than the rejection on the horizontal cutting side, which can meet the quantity of grinding required.
Thanks to a regular cut, the mill can keep its shape and its sharpness.
How is the double-end shredder more effective than other treatment technologies?
Two -end grinding can treat two parallel surfaces at the same time. The part is not intentionally placed in the support disc for grinding between the two sand wheels, which can reach a very fast treatment time.
In this process, the workpiece is not fixed and has not been fixed to the “nest” which is not fixed to the part of the part. Then treat both sides of the room between the two factories. The upper grinding wheel is set with the “inclination” orientation parameters, which allows the upper mill to maintain the required angle with the lower mill. Consequently, the space between the grinding wheels must be greater than the rejection on the horizontal cutting side, which can meet the quantity of grinding required.Thanks to a regular cut, the shape of the wheel can maintain its shape and its sharpness.
Why is the double-End grinding process important?
In the case of the two end of the room, they must be crushed and these surfaces must be completely flat and parallel, and the double -section surface grinding becomes very necessary. Double END grinding produced at the end of the manufacturing process, because the elimination of balance is low and the accuracy of tolerance is high.
When do you need a super fine grinding process during treatment?Why should I grind at this stage?
After rough treatment, heat treatment, grinding / treatment of hard vehicles, super fine grinding is generally the last process.Since the super-fine grinding treatment is generally key bearings or sealing surfaces, the process of processing all of these previously mentioned processes is necessary to meet the quality requirements required for the gentle surface surface.
How many specifications / granular oil can be selected? / What role do the different specifications do?
It is estimated that there are hundreds of thousands of oil and stone specifications to choose.The material is generally alumina or silicon carbide, and the surface is used for hard coating.The size of the particles varies from 220 mesh to 1,500 mesh.The most common is ceramic adhesive, with multiple methods of hardness and treatment.Many options can refine the specifications of oil and stone, which makes the process of personalized treatment possible.
What is the tire oscillating head? How to make it more efficient?
The pneumatic oscillating head can generate a very high oscillation frequency (1600-2200 Vibration frequency / per minute), and the abridged amplitude oscillation (2-5 mm) is designed as a balanced solid quality device.Because all the movements are linear, it is not affected by the problem of balance and wear, which avoids caused by the mechanical oscillating device on the eccentric axis.Damage.
What is the importance of the super fine research of the cross model? What are the advantages?
By reducing the initial wear, by reducing the friction coefficient and providing a channel for the distribution of lubricants on the surface of the room, generating models of cross-mSH, a super fine research platformsex.
What type of different types of materials can the supernatural grinding process improve?
Hergain steel, gentle steel and ball ink melting are the most common super finished treatment materials because they are widely used in rolling and power transmission applicationsEssence, however, any material involving slippery or rotary friction can be used to reach the surface quality.
Double imported milling machine sale phone phone: 135 2207 9385
What processing results can the super fine grinding process be obtained?
The typical precision after super fine is:
RA <0.025 µm,
Rounder <0.5 0m,
Or plane degree <1
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
