CNC Knowledge: The reason why machinery worsens and worsens, and finally found the deep cause!

1. Trumry reductionMaterials with lots of low labels. In normal circumstances, the melting with a 180 label is generally normal. Insufficient hardness, the consequence is deformation.Small bed, large trail board; Little Mara. Take the cut line, for example, the machine bed 50, the machine workbench 80 above, the cast itself uses the label with low hardness of insufficient hardness, plus a strong overloaded pressure, it is easier to be distorted.

In the past, the old manufacturers, as there was no specialty, the molded parts should be placed on the sun and the rain outside for more than a year to eliminate stress. Even the cast is still hot.The thickness of the flow and the weight is much lower than before.

2. Problem of equipment processingIn this Jiangsu and Zhejiang bank, another situation of exchanges of all parties is that few factories have processing beds for useful CNC Dragon Gate, and most of them are always traditional equipment. There are hundreds of millions of good mother machines, and they cannot afford it. Naturally, various indicators cannot be reached.

The large processing center of the dragon door of the processing bed, in the beach 1 meter in length, has a straight line and a degree parallel to 0.003, the guidance rail of the dragon door is crushed at less than 1 meter And roughness is approximately 0.001. Be a quality guarantee! Rail consultation guide long imported: 135-2207-9385;

The shell of the electric treatment spindle, the short grinding machine and the large internal and external round grinding machines of the treatment leader can treat the inner and exterior circle at the same time, and the precision is located in RA0.4. Consultation Mill Tel: 135-0128-2025.

Third, staff problemsThe assembly of everyone’s machine tools is extremely important. Most new young people are not willing to engage in this industry. Some always do it and they don’t want to mix. The effect of the machine tool is poor.

In the machine tool industry, the staff plays a very critical role. In a machine tool factory, technology in the heritage of a generation in staff can ensure that the products of machine tools are strong and that the flow of personnel cannot guarantee the quality of the product .

In addition, the machine tool industry has its internal particularity: the scale and quality are inversely proportional, the greater the quality of the product, the more general the quality of the product; The blind pursuit will inevitably take the premise of the quality of the sacrifice.

Fourth, environmental situationThe 2002 to 2012 manufacturing gold period has passed, the manufacturing industry has fallen and the demand for natural machine tools is also down. Factory merchants are still there.All of the above is the reason why the tool-tool is worse and worse.So why does the manufacturer do it? Answer: everything is to reduce costs.Think about it, what kind of things did not want to increase and increase costs during these years. Raw materials, water and electricity taxes, artificial protection and the environment are not allowed to start; The only way is to cut the corners, the tooltip is bad, then the tool-tool is dismantled to harm the users.From a neutral and third part point of view, I hope that users can be rational, cheap and not good, and pay a price and a point. profit.Sometimes, in the short term, it seems to save a little money, but in the long term, I still suffer. In normal circumstances, the function is used for 5 years and can only be used for 1 year. Don’t look at him yourself.

Of course, manufacturers are also strictly self-discipline, do what they should do so that quality earns customers.To build a good ecological environment, you need everyone’s efforts, industry has hope, so that it is no longer ridiculed, muddy and humiliated, and can sit on equalization with the Devils, nor even exceed.