The treatment center is the most common CNC machine. Where is the difference? And listen to the comments. Ignorance, the manufacturer of the treatment center of the treatment center is not mentioned.
The first global treatment center was developed for the first time by the Trek of the United States in 1958. It adds an automatic knife change device based on the crushing of the CNC hierarchy. The Beijing Institute of the Institut des Machines-Touks in 1975 gave the first horizontal treatment center JCS-013 in China, and in 1978, the first vertical treatment center in China JCS-018.
It is also said that JCS-013 was actually manufactured by the second Machine Tool factory. At that time, the technical distance between China and the world was 17 years. Today, the technology application of the current treatment center of China is essentially synchronized with the world, and there is a large gap between precision and stability and world class level.
Why the same vertical treatment center 850 (management X is 800 mm and management is 500), there is a large price difference in foreign and domestic and national countries. Divide manufacturers of typical vertical treatment centers in the country and abroad into 7 categories and configure the vertical treatment center with three 850 axes for example (only for the main models, the configuration of each manufacturer will be different) To talk about it. Characteristics of these 7 types of products.
By making the queue and in comparison, a correct analysis of the position occupied by domestic machine tools is carried out. The distinction of each level affects the brain. .
The final decision is based on the general price.
The first step —
Switzerland, Switzerland, Switzerland, Switzerland, Switzerland, Switzerland, Switzerland, Germany, Germany, Germany and other players. Regardless of the interior, the design level and the treatment capacities and the treatment accuracy, it is almost impeccable. The sympathetic work, excellence, the accuracy of treatment of machine tools are extremely high and the exit is very low. Because the price is too expensive and the cost of use is too high, users often buy it without the case.
The brand image of the first level of processing of the level is high. High and widow, the high cost of purchases and use leads directly to the low rate of market application. Although the price is high, the profit is not necessarily high, the quality is not necessarily good, the operation is not necessarily good, the round after the glorious can be sad tears. Michael, in Switzerland, was acquired by the Swiss group Aachiximil, Swiss Baomai was acquired by Strag in Switzerland … I did not help think of the best supercar in the world Bugatti Veyron. 4 degrees.
The quality of the machine tool is ensured by the quality of the bed material, the level of mechanical processing, the quality of the parts, the quality of the component, the quality of the assembly and the control and the control of the production. The machine tool is always guaranteed manually. The level of assembly technicians is high or low, and mass production of machine tools has a severe delivery time. The ten main manufacturers of machine tools in the world are the reason why it cannot enter the first step.
The second step —
Germany DMG in the second step of the master, Germany, Germany, Stama, Germany, the Japanese Moriki machine, Japan Da Nuo, Makino, Japan, Japanese Toyota workers , American Mag, American Harbin, Italy, Italy, Italy, Italy The names of the names of many players such as Fidia, Spain Donnot Bart are almost familiar.
These players are at the forefront of the world sales machine sales list all year round. Generally, small and average production, in place, of good quality only for products that produce high profits. The price is relatively anchored that the first step. The second level manufacturer has a large promotion, a high market share and a special solution to high mechanical treatment problems.
For companies for processing machines on a certain scale, if there are not a few second players and Angches seated, I am embarrassed to say that their products are first class. Most of the machine tools of certain companies are low, and they will also buy machine tools in echelon to charge the facade, which is specially used to receive orders and customers to visit. It is the same thing as that of the Audi car which is not a better luxury car. The first and second levels are considerably ahead of product quality and technological innovation.
Currently, advanced technologies such as natural or artificial marble bed technology, body temperature technology in the bed, linear engine reader, cooling the center with roller screws, the center of gravity, The super fast knife mechanism, high -speed electric spindle and other advanced technologies are the first to apply to the first and second levels of the product.
The first and second levels are almost the world of the Swiss, the Germans and the Japanese. In 10 years, the possibility for Chinese companies to enter the first and second levels is very thin.
The third step —
Tight fartes, China and Japan joint ventures, Sino-Japanese joint ventures, Sino-Japanese giants, Mazak, Harbin in the United States, in the United States, Doushan, South Korea, Samsung, South Korea, Taiwan Yongjin, Taiwan Dongtai , Taichung Stunborn Machinery, Taiwan Express, Taiwan Express, Taiwan Gao Peak and other brands are the main brands of machine tools for domestic front line manufacturers. The price is between 450 and 800,000.
Although companies that produce first-class products also use first and second level machine tools, because the purchase cost is too high, real-scale real use is mainly based on 3rd machine tools step. These machine tools are solid, durable, reliable and stable, and no chain at critical moment is a good help to ensure the quality of the product and the efficiency of the production.
The third level is mainly a brand of joint venture of foreign and Taiwanese machine tools in the country or producing in the country.
Fourth level —
The Actual Combat Bei Yi, Beijing Electrical and Electrical Academy, Nantong Technology, Xinrui, New Wei, Nikki, Haitian, Dajin, Taiwan Lichi, Taiwan Daqiao, Taiwan Youjia, Taiwan Liwei, Taiwan Egma, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan Brands such that Qifa are the main brands of machine tools in manufacturers of first and second machines. The price is approximately 32 to 45,000. The fourth market of Echelon machines is not lower than the third step. Companies.
This level company is made up of exceptional national companies and certain continent factories in Taiwanese companies. He was among the third step.
5th step —
万金油沉阳、宝鸡、云南、大连、长征、汉川、宁江、凯达、联强 （新浙） 、青海一机、鲁南、杭机、宝佳、皖南、捷甬达、永华、迪LAM treatment centers, Datian, Jiatai, Longsheng and other brands can be seen in mechanical treatment companies in any corner.
The price is around 25 to 32 million. Some brands will also launch certain special models that cut corners and materials, which are not recommended.
The 850-Plus in this price range has the greatest number of interior market sales and is most accepted by ordinary mechanical users. The dirty, tired and unattended work is to do these machine tools. At least half of this level manufacturer produces the production of assembly lighting machines, the product is seriously homogeneous and the input threshold is relatively low.
If the factory scale is equivalent and management is reasonable, the difference between the quality of the different brands is very low. The choice of this level machine obliges users to have solid application capacities. Several giants of domestic machine tools are entirely capable of creating the third and fourth levels, but they have relaxed their own requirements, and they are ready to play a price war in the 5th step. Several giants frequently merge and foreign machine tools have not brought substantial improvement to their products and markets, but they obtained the nickname of “destroyer of foreign machines”.
6th step —
Machines of small economic and affordable brands such as Haïten, Pepsi, Yiming, Da Sen, Dingya, Hait, Linkin, Dingtai and Zhongbo generally choose low -end brand CNC systems, with a sale price of around 1.80 000 to 250,000. Some companies are the production model for assembly optical machines. Due to the relatively small scale of the company’s machine tools, standardized quality management is the 5th step. At the same time, in order to reduce costs, some inexpensive brands will also be selected in the purchase of components, which can have a certain impact on stability. machine tools.
For small and medium -sized companies with low -precision requirements and close supply budgets, the 6th grade treatment center is a good choice. The emergence of Siemens 808D also added the choice of this level to add more CNC systems.
7th Echelon —
The first choice of money to save money is the treatment center assembled for assembly guerrillas, and the cost is less than 180,000. The method is that the user buys the optical machine, the CNC system , the screw, the library of knives and other components by themselves, then installs the guerrillas on the site to assemble. The QC process such as quality pipes and other QC no.
You can know the quality of service without moving the brain. This grade treatment center generally uses the new generation of Taiwan, Baoyuan or Domestic Kane Emperor, Guangzhou CNC System. The marks for the Tournex rails are not bad and other components are purchased with the attitude of being able to save. If you have a good personal relationship with the installation guerrillas and the level of the installation technician is very high, and you know a certain mechanical and electric maintenance, you congratulate yourself so that you have considerably reduced the purchase and the use of machine tools.
If you have none of these three conditions, the cost you pay may be higher than purchases 6 or even the 5th step. The shy entrepreneur in the pocket uses this method to buy the same proportion of the establishment. acceptance of the machine. The summary of the seven steps forming a diamond -shaped manufacturer. The most densely manufacturer’s most densely manufacturer’s manufacturer.
The Echelon 1-3 is a clear foreign finance company. There are no products without 5 to 7 Échèmes abroad. It is not difficult to unravel the third level in the third step.
Daguang focuses on providing solutions such as precision CNC machining services (3-axis, 4-axis, 5-axis machining), CNC milling, 3D printing and rapid prototyping services.
