CNC machining centers are high precision CNC machine tools. The CNC system emits commands through a series of electronic components and circuits throughout the tool-tool, thus ending various process of treatment of the machine tool. The CNC technology of my country has developed rapidly over the past decade, and the CNC systems of the national machining center have occupied a certain market share. As for the current market for interior machining centers, the CNC systems used in high -end and mid -range models must still be imported. CNC systems are highly technical and have many technical obstacles and technical difficulties. There are not many good providers of CNC systems in the world, and Siemens and Fanuc are undoubtedly the two giants of the CNC CNC Central machining systems.

In fact, the operating principles of the Siemens CNC system and the Fanuc system are almost the same, and the operating interface, the correspondence of the functions and the programming methods are slightly different. Then, Yuange will present these two imported CNC systems in detail.

Fanuc CNC system

Background

Fanuc is a professional digital control manufacturer in Japan and is also the largest world manufacturer specializing in the production of CNC devices. It was the first to apply CNC systems to machine tool equipment, providing exceptional contributions to the development of global industrial automation. Siemens is a global company in the field of electronic and electric engineering. Siemens CNC System is a company department. Siemens and Fanuc also design other fields of products, such as Fanuc robots, Siemens electrical devices, etc. This has nothing to do with our processing center industry, so I’m not going to go into details here.

Siemens CNC system

Grid requirements

The Fanac system generally uses an isolated, three -phase power supply380V becomes 200V. The Siemens CNC system is a power of 380V. On the other hand, the Fanuc system is more suited to the current requirements of the electrical network of our country. A major requirement for the Siemens CNC system is that the requirements of the electrical network are high, which is not very suitable for the current situation of the interior electrical network.

Degree of development

Siemens has a high degree of development in CNC and has reached channel control. But it’s not too stable.The PLC crash or the loss of program is one of the common defects in repairs. Fanuc’s PLC program is stable and generally does not crash. Unless the system fails, the program will generally not be lost. If you do not want to engage in the underlying work, get rid of the status quo and learn the UG programming, you can add the qq editor: 770573829 to learn the machining and programming technology CNC.

To start

At the start of the operating system, the programming situation, the ease of use and the ease of learning should be considered globally. Take the metal cutting operations commonly used as an example.The code G and the code M are always the most important programming methods. In terms of ease of use, the Siemens CNC system is better. Even if the user has no common knowledge of parts technology and no programming foundation, he can always use the Shopmill function and the graphic programming function to complete the programming. In terms of easy learning, the Fanuc panel has many functions and is not easy to master. The name and function of the key must be memorized. Siemens is easier, only three keys are necessary to operate and the rest can be supplemented by screen prompts.

In this case, the current Importé CNC interior machining system uses a little more machines than Siemens. These two CNC systems can mainly represent the highest level of imported CNC systems!